|
|
|
Cutting Edges
|
|
|
End Bits
|
High-Silicon Steel Edge with
high wear Resistance
Komatsu genuine cutting
edges are tough cutting edges made of high-silicon steel,
rolled and subjected to excellent heat treatment. In
addition, the combination of cutting edges and end bits
provides excellent cutting quality. The high wear resistance
and impact resistance of Komatsu genuine cutting edges
make them superb cutting edges which are suitable for
any kind of operation. Moreover, the rear of the edge
is chamfered to prevent loosening, wear, or breakage
of mounting bolts.
Cutting Edges are doubly economical
Komatsu cutting edges are economical because they
can be turned over, thereby providing double the wear
life.
[Not applicable to cutting edges for motor graders.]
Excellent Cutting Quality
The combination of Komatsu
genuine side cutter and bucket teeth ensures a sharp
digging force which will increase your production output.
Excellent Bucket Life
Komatsu genuine side cutters protect the side face
of the bucket and extend bucket life. In addition, they
increase the bucket width and capacity, and at the same
time, reduce the maintenance cost and operating costs
of the bucket.
|
|
Bolt-on teeth
|
|
|
Weld-on teeth
|
High Economy
Komatsu genuine bucket teeth are long-life, highly economical
bucket teeth with excellent wear and breakage resistance.
Excellent Durability
The superior material and excellent heat treatment used
for the Komatsu genuine bucket teeth provide them with
excellent durability. In addition, the high impact resistance
means the bucket teeth can withstand any heavy-duty
operation.
Unchangeable Penetration
The shape of Komatsu genuine bucket teeth features the
Komatsu exclusive self-sharpening profile, so that the
sharpness of the tooth tip is never lost. In other words,
Komatsu genuine bucket teeth provide unchanging penetration,
which can improve productivity in all kinds of applications.
|
|
Short points
Short points have high breakage resistance and can
display substantial power in heavy-duty operations
such as on hard rock or hard gravel. |
|
|
Long points
Long points have a large wear tolerance and are
suitable for use in operations where there is no
risk of breakage. |
Selection of Points to match the
Specific Job
Komatsu genuine ripper points are economical and can
be selected to match the specific operation.
|
|
Wear self-sharpening shape keeps
the tip sharp. |
|
|
Wear self-sharpening shape keeps
the tip sharp. |
Excellent Penetration
Komatsu genuine ripper points features the Komatsu exclusive
self-sharpening profile, ensuring that they always remain
sharp and provide unchanging penetration. These points
are long-life points made of high-silicon steel with
excellent wear and impact resistance.
Reversible Points
Replacement can be postponed by turning a point to present
a new wearing surface.
|
|
Komatsu genuine ripper points
are economical because they are reversible, thereby
providing double the wear life.
|
Blade reinforcement plates are installed on jobsites
where extreme blade wear occurs, or on rocky ground
where the blade is likely to be damaged or broken. These
plates are weld-on types.
Bulldozer
Shear pins are installed to prevent damage
to the work equipment or circle reverse gear when a
large load is suddenly applied to one side of the blade.
The shear pins are installed at the centre of the circle
reverse gear.
Bucket hinge pins on hydraulic excavators are
employed to connect the bucket and link.
Bucket hinge pins on wheel loaders are used to connect
the bucket and lift arm, and bellcrank.
|
